Installing LED Troffer Light

How to Install the Hykolity Architectural LED Troffer Light

Our architectural style LED troffer light is one of our brightest and stylish office space solutions. Its concave frame gives your ceiling a recessed appearance in your ceiling, while the convex diffuser lens contrasts with the frame. This creates a fresh, dynamic atmosphere that modernizes your workspace and brings youthful energy.

If you are planning on retrofitting your office with these 2x4 LED troffers, we’re here to provide you the steps to take to upgrade your lighting. While the steps may be simple, we highly recommend hiring a licensed electrician to do the installation for you. Should something odd be spotted, a trained professional would be able to safely deal with it without getting hurt. With that being said, here is how to install the architectural style LED troffer light:

 

Step 1: Shut off the power to your factory lighting fixture. Locate your power panel and flip the appropriate switch.

Install Hykolity 2x4 Architectural LED Troffer

Step 2: Remove the flat panel lens, fluorescent tube light bulbs, and the ballast cover.

Install Hykolity 2x4 Architectural LED Troffer

Install Hykolity 2x4 Architectural LED Troffer

Install Hykolity 2x4 Architectural LED Troffer

Step 3: Unwire the ballasts from your building’s stock wiring.

Install Hykolity 2x4 Architectural LED Troffer

Step 4: Remove the wire management ring from the fixture. You will be using it later.

Step 5: Unscrew the bolts securing the fixture to the ceiling frame. Unscrew the bolts securing the wood frame wires.

Install Hykolity 2x4 Architectural LED Troffer

Step 6: Completely remove the fixture from your ceiling.

Install Hykolity 2x4 Architectural LED Troffer

Step 7: Slide the 4 retaining clips onto the LED troffer light.

Install Hykolity 2x4 Architectural LED Troffer

Step 8: Remove the cap and fish out the power wire. Pop out any wire management holes you need on the cap.

Install Hykolity 2x4 Architectural LED Troffer

Step 9: Affix the wire management ring to the cap. Screw in the cap to the building’s stock wiring.

Step 10: Install the LED troffer onto your ceiling.

Install Hykolity 2x4 Architectural LED Troffer

Step 11: Wire the LED troffer to your stock building wires. Tap the positive wires together and the negative wires together.

The LED architectural troffer can be wired with a dimmer and an emergency driver to prevent shorting-related damage. Learn how to wire these accessories in a later post.

Install Hykolity 2x4 Architectural LED Troffer

Step 12: Switch on the power to your new LED troffer light to check your work.

Install Hykolity 2x4 Architectural LED Troffer

With this LED upgrade, your ceiling will give your office a modern and productive feel. Choose between 4000K or 5000K white for your desired atmosphere. While you're here, check out our other LED flat panels and troffer lights and follow us on Facebook, Twitter, and LinkedIn for tips and updates. See you next year!

Previous article 3 Questions to Best Tell You About CRI

Leave a comment

Comments must be approved before appearing

* Required fields