Luz de tienda LED de 4 pies, tubo de luz LED T8 integrado en forma de V, 5200LM, 40W, 6500K blanco súper brillante, luces de tienda enlazables de alto rendimiento con interruptor de encendido/apagado incorporado para almacén, ETL, paquete de 10

$109.99
Vendor: HYKOLITY
SKU: SLC-1175

🚚 Free shipping for all orders

HURRY! ONLY LEFT IN STOCK.

SHOP MORE & SAVE BIG
BUY 20+, GET 10% OFF
☎ TAP TO CALL: +1 (562) 456-0507
Order in the next [totalHours] hours %M minutes to get it between and

Hurry up! Limited-Time Offer Ends in

%-D%!D:Día,Días; %-H%!H:hora,horas; %-M%!M:min,minutos; %-S%!S:segundo,segundos;

frecuentemente compramos juntos

Precio total:$239.98
Descripción
  • ✅ Super brillante: la luz de tienda T8 diseñada en forma de V proporciona un amplio ángulo de haz de 270 grados, los chips LED de doble fila también garantizan suficiente luz para iluminar cada rincón oscuro de tu espacio.
  • ✅ Enlazable: las luces LED de tienda conectables de 4 pies utilizan conectores sin costura para conectar hasta 8 piezas juntas en su garaje, armario, taller, almacén, sótano y trastero.
  • ✅ Hasta un 75 % de ahorro de energía: las luces LED para tiendas de 4 pies de Hykolity cuentan con un brillo de 5200 lúmenes usando solo 40 W, equivalente a 3 tubos fluorescentes de 32 W y 4 pies, lo que proporciona una reducción del 75 % en el uso de energía.
  • ✅ Fácil Instalación - Plug & Play. Viene con un cable de alimentación de 59" con interruptor de encendido/apagado y otros accesorios pequeños, sin necesidad de cableado externo o interno.
  • ✅ GARANTÍA DE 5 AÑOS: ofrecemos 5 años de garantía para la luz LED de taller de garaje de 4 pies contra cualquier defecto en los materiales y la mano de obra, cubre la mayoría de los daños y los costos de envío para los reemplazos. Póngase en contacto con nosotros para cualquier problema de calidad. "

Customer Reviews

Based on 947 reviews
82%
(778)
14%
(129)
4%
(40)
0%
(0)
0%
(0)
J
Jim Diener (Altadena, US)
2 ft lights

These lights are brighter than I thought. They are easy to mount you may need to look at the length of screw to your appellation.

M
Mike Beyer (Rio Rancho, US)
Great LED Replacements

Replacing old florescent tubes with these has been very rewarding. Easy to rewire the fixtures with new tombstones. Much brighter.

G
GAE (Roanoke, US)
Great lights

I received and installed 16 of the 20 T8 hybrid light tubes from Hykolity on 4 of my 4lamp flourescent lights with electronic ballasts and all of them came on without a hitch and much brighter than the old lights. I'm happy with this purchase and hope they last.

k
keith tuzzolo (Voorheesville, US)
Much more light and easy to install

Same

R
Randy
Easy to install

Love them. The easiest upgrade to my shop ever.

R
Randy
Easy to install

Love them. The easiest upgrade to my shop ever.

R
Randy
Easy to install

Love them. The easiest upgrade to my shop ever.

C
CG2015
Works great, may need to bypass the ballast, easy thing to do.

If you have an old home with fluorescent tubes, chances are your ballast may not be compatible. But don't be discouraged, it is very easy to bypass the ballast and make it works. All LED bulbs work with direct current. To make it easy for us to swap from fluorescent to LED bulb, they try to tweak these LED compatible with some modern ballasts, but not all.If you hook it up, and lights do not shine, then it is not compatible with your ballast, time for an easy bypass, or call an electrician. Search youtube for how to expose your ballast (squeezing the cover immediate above the tube or turn one screw...). Chances are also your old set up was double-end type. Turn off main electrical source, then cut the wires from both sides of ballast, then reconnect white (neutral) to 2 wires from one side (usually yellow); and the black to 4 wires from other side (usually 2 blue and 2 red). I used Way-go connectors with ease. My understanding is you could connect either white or black to either side. You, now, bypass the ballast. You could remove it and throw away, or just leave them there with all the severed wires taped away. Reassemble your light with new LED bulbs, and voila! Search youtube for better instruction how to do it. Good luck. It took me less than 10 minutes.

Z
ZROB
Worth every penny!

Installed these LEDs after removing old fluorescent bulbs. They are very bright and installation is a breeze. Definitely recommend these for any garage/shop!

Z
ZROB
Worth every penny!

Installed these LEDs after removing old fluorescent bulbs. They are very bright and installation is a breeze. Definitely recommend these for any garage/shop!